Trip computer - combined instrument panel "Digital"
The trip computer's menu is in a variable loop. One of the alternatives is that the trip computer's three displays extinguish - this also marks the start/end of the loop.
Functions
The different functions of the trip computer are listed in the following table:
Functions | Information |
---|---|
| Note that this function does not reset both trip meters T1 and T2 - see the table under the next section "Headings" or the section "Resetting with 'Digital'" for information on the process. |
For more information, see Messages - handling. | |
The appearance of the combined instrument panel is selected here. | |
Select Auto On or Off. For more information, see Additional heater*. | |
Adjusting the combined instrument panel's brightness and colour intensity. | |
| For a description of programming the timer, see Engine block heater and passenger compartment heater* - timer. |
Shows the number of months and mileage to next service. | |
For more information, see Engine oil - checking and filling. |
Headings
Three trip computer headings can be displayed simultaneously - one in each "window" (see previous figure).
Heading combinations | Information | ||
---|---|---|---|
Average | Trip meter T1 + Meter reading | Average speed |
|
Instantaneous | Trip meter T2 + Meter reading | Distance to empty tank |
|
Instantaneous | Meter reading | kmh<>mph | kmh<>mph - see section "Digital speed display". |
No trip computer information. | This option extinguishes all three trip computer displays - it also marks the beginning/end of the loop. |