Activating and starting Cruise Control

The cruise control function (CC1) must first be selected and activated in order to be able to regulate the speed.
P5-1507-CC rattknappar-2
NOTE: The illustration is schematic - details may vary depending on car model.

Set cruise control in standby mode

To set cruise control in standby mode:
Press ◀ (1) or ▶ (3) to browse to the symbol/function P5-1507-Symbol_acc (4).
The symbol is shown and the cruise control can then be activated.

Activating/starting cruise control

In order to start the Cruise control from the standby mode, the car's current speed must be 30 km/h (20 mph) or higher. The lowest speed that can be stored is 30 km/h (20 mph).

To start the cruise control:
With the symbol/function P5-1507-Symbol_acc displayed, press the steering wheel button P5-1507-Symbol 5x3,5-CC rattknapp Centrum-V (2).
Cruise Control starts and the current speed becomes the stored speed.

 Note

Cruise Control cannot be enabled at speeds below 30 km/h (20 mph).
  1. 1 Cruise Control

Related documents