Setting the stored speed for cruise control functions
It is possible to set stored speed for the speed limiter, cruise control and Pilot Assist* functions.
|: Increases the stored speed|
|: Reduces stored speed|
- Short presses: Each press changes the speed in increments of +/- 5 km/h (+/- 5 mph).
- Press and hold: Release the button when the speed indicator (3) has moved to the desired speed.
Effect of the accelerator pedal
If the driver increases the car's speed using the accelerator pedal before pressing the steering wheel button (1), the speed stored will be the car's speed when the button is depressed, provided the driver's foot is on the accelerator pedal at the moment when the button is depressed.
A temporary increase in speed with the accelerator pedal, e.g. during overtaking, does not affect the setting - the car returns to the last stored speed when the accelerator pedal is released.
The driver support functions can follow another vehicle at speeds from 0 km/h up to the maximum speed of the car.
Pilot Assist can give steering assistance from almost stationary up to 140 km/h (87 mph).
Note that the lowest programmable speed is 30 km/h (20 mph) – even though it is capable of following another vehicle down to 0 km/h, a speed lower than 30 km/h (20 mph) cannot be selected/stored.