Park assist camera - settings

Parking camera is an auxiliary system, which is activated when the reverse gear is selected.

Activate switched-off camera

The camera starts automatically when reverse gear is selected, but it can also be activated manually as follows:

P31346- Park Assist Camera
  • Press CAM - the screen shows the current camera view.

Change setting

The settings for the parking camera can be changed when the screen shows a camera view:

  1. Press OK/MENU when a camera view is shown - the screenchanges to a menu with various options.
  2. Turn to reach the desired option with TUNE.
  3. Highlight the option by pressing OK/MENU once and go back out with EXIT.

Towbar

The camera can be used to advantage when hitching a trailer. A park assist line for the towbar's intended "trajectory" toward the trailer can be shown on the screen - exactly as for the "wheel tracks".

A choice can be made between showing the "wheel tracks" or the towbar's trajectory - both options cannot be shown simultaneously.

  1. Press OK/MENU when a camera view is shown.
  2. Turn to reach the Tow bar trajectory guide line option with TUNE.
  3. Highlight the option by pressing OK/MENU once and go back out with EXIT.

Zoom

If precise manoeuvring is required then the camera view can be zoomed in:

  • Press CAM or turn TUNE - repeated press/turn changes back to the normal view.

If more options are available, they are in a loop - press/turn until the desired camera view is shown.