Volvo

Customised supportGet relevant information to your specific car.

Activating and starting Cruise Control

The cruise control function (CC1) must first be selected and activated in order to be able to regulate the speed.
P5-1507-CC rattknappar-2
NOTE: The illustration is schematic - details may vary depending on car model.

Set cruise control in standby mode

To set cruise control in standby mode:
Press ◀ (1) or ▶ (3) to browse to the symbol/function P5-1507-Symbol_acc (4).
The symbol is shown and the cruise control can then be activated.

Activating/starting cruise control

In order to start the Cruise control from the standby mode, the car's current speed must be 30 km/h (20 mph) or higher. The lowest speed that can be stored is 30 km/h (20 mph).

To start the cruise control:
With the symbol/function P5-1507-Symbol_acc displayed, press the steering wheel button P5-1507-Symbol 5x3,5-CC rattknapp Centrum-V (2).
Cruise Control starts and the current speed becomes the stored speed.

 Note

Cruise Control cannot be enabled at speeds below 30 km/h (20 mph).
  1. 1Cruise Control

Did this help?