Operating the driving lights
Familiarise yourself with operating the lights controls that are available via the left-hand steering wheel stalk.
You can move the left-hand stalk forwards or backwards to switch between different lighting selections.
The selections available are:
- High beam on
- High beam off
- High beam flash
Manual high beam
- When the automatic lights mode[1] or the manual passing beam is selected on the left-hand steering wheel stalks rotating ring, push or pull the stalk to turn the manual high beam on or off.
Automatic high beam
- When the automatic high beam is activated on the left-hand steering wheel stalks rotating ring, pull the stalk fully to deactivate the automatic high beam.[2]
High beam flash
- Pull the left-hand steering wheel stalk slightly to activate the high beam flash.