Using stored positions for seats and mirrors

If the positions for the power* seat and door mirrors have been stored, they can be activated using the memory buttons.1

Using a stored position

P6-CMA-seat position memory buttons

A stored position can be used with the front door open or closed:

Front door open

Briefly press one of the memory buttons 1 (P5-Icon red circle 2) or 2 (P5-Icon red circle 3). The power seats and door mirrors will move and stop at the positions stored in that button.

Front door closed

Press and hold one of the memory buttons (1 (P5-Icon red circle 2) or 2 (P5-Icon red circle 3) until the seat and door mirrors stop in the positions stored in that memory button.

If the memory button is released, the seat and door mirrors will stop moving.

 Warning

  • This list point needs to be translated exactly to: "Because the driver's seat can be adjusted with the ignition off, children should never be left unattended in the vehicle.
  • Movement of the seat can be STOPPED at any time by pressing any button on the power seat control panel.
  • Do not adjust the seat while driving.
  • The seat should be adjusted so that the brake pedal can be depressed fully. In addition, position the seat as far rearward as comfort and control allow.
  • The seat rails on the floor must not be obstructed in any way when the seat is in motion.
  1. * Option/accessory.
  2. 1 The latest position is also saved automatically in the active user profile and will be used the next time the same profile is used again.