Connect key to user profile

A key can be linked to a profile. This profile and all of its settings will then be automatically selected every time this specific key is identified when unlocking or opening the driver's door.

If the key is not connected to a profile, the last-used profile will be activated when the vehicle is started. The first time the vehicle is started, the Owner profile is automatically selected.

Connecting a key to a profile

 Note

If the key was previously linked to another profile, the link will be moved from the previous profile to the active profile.
Tap iCup-2037-Settings symbol.
Select Profiles.
Select Connect key to profile to connect the selected key to a profile.

A profile can only be connected to the key currently being used in the vehicle. If there are any other keys in the vehicle, the message More than one key found. Place the key you want to connect on the backup reader. will be displayed

P6-1746-XC40- Backup start place in tunnel console
Location of the backup reader in the tunnel console.

Disconnecting a key from a profile

Tap iCup-2037-Settings symbol.
Select Profiles.
Select Disconnect key from profile to delete the active profile from the connected key.

A key can be deleted from a profile even if the key is not inside the vehicle.