Trip computer – Trip statistics

Trip information from previous trips regarding average fuel consumption and average speed is stored and can be displayed in the form of a bar chart.

Function

P4-1220-Trip statistics
Trip statistics1

Each bar represents a driving distance of 1 mile or 10 miles, depending on the current scale; the bar at the far right shows the value for the current mile/10 miles.

Use TUNE to change between 1 mile and 10 miles; the marker at the right will also change according to the scale selected.

Settings

Settings can be made in the MY CAR menu system as follows:

MY CARMy S60Trip statistics:

  • Start new trip: press ENTER to erase all pervious statistics. Exit the menu by pressing EXIT.
  • Reset for every driving cycle: select by pressing ENTER. Exit the menu by pressing EXIT.

Selecting Reset for every driving cycle erases all trip statistics automatically if the ignition is switched off for at least 4 hours. When the engine is restarted, new statistics will be stored.

To get new statistics if the engine is restarted before 4 hours have elapsed, the existing ones have to be erased manually by selecting Start new trip.

For additional information, see Information display – menu controls.

See also the information about Eco Guide in Eco Guide* and Power Meter*.

  1. 1 The illustration is generic; certain details may vary from model to model
  2. * Option/accessory.