Detailed information for child seat manufacturers

The table provides detailed information for child seat manufacturers on what locations in the vehicle are suitable for what types of child seats.
P5-1817-S60/V60–Safety–Child restraint placement overview
Seat positions in left-hand drive cars.
P5-1817-S60/V60–Safety–Child restraint placement overview RHD
Seat positions in right-hand drive cars.
Seat position112 (with deactivated airbag, only rear-facing child seats)2, 32 (with activated airbag, only forward-facing child seats)2, 33445
Seat position suitable for universal category restraints that are attached using the vehicle's seatbelt (Yes/No).NoYes5Yes5YesNoYes
Seat position for i-Size (Yes/No)NoNoNoYesNoYes
Seat position lateral fixture (L1/L2/No)NoNoNoNoNoNo
Largest suitable rearward-facing fixture (R1/R2/R3/No)NoR36NoR3NoR3
Largest suitable forward-facing fixture (F1/F2/F2x/F3/No)NoNoF3F3NoF3
Largest suitable booster fixture (B2/B3/No)NoNoB3B3NoB3
  1. 1 In accordance with illustration.
  2. 2 The seat cushion extension must always be retracted for the installation of child seats.
  3. 3 Child seats with support legs can be used here.
  4. 4 Child seats with support legs cannot be used here.
  5. 5 Adjust the seat backrest to a more upright position.
  6. 6 Works for the installation of ISOFIX child seats that are semi-universally approved (IL) if the vehicle is equipped with the ISOFIX console accessory (the accessory range varies depending on market). There are no upper tether anchors for child seats here.