Customized supportGet relevant information to your specific car.

Trip computer – functions, analog instrument panel

The content and appearance of the trip computer varies depending on whether the vehicle is equipped with an Analog or Digital instrument panel.

P3-1320-US-Trip Computer Analog
Information display and controls
  1. Ikon röd cirkel 1OK–press to access the trip computer's functions or acknowledge/confirm/erase a message
  2. Ikon röd cirkel 2Thumb wheel–turn to access the list of trip computer information headings and to scroll among the alternatives
  3. Ikon röd cirkel 3RESET–press to cancel/reset/exit a function after a selection has been made

The trip computer has two different menu groups:

  • Trip computer functions
  • Trip computer information headings in the instrument panel

Functions

To open and make settings in the trip computer functions:

  1. Ensure that none of the trip computer controls are being used in a command sequence; reset them by pressing RESET twice.
  2. Press OK to open the list of functions.
  3. Use the thumb wheel to scroll among the functions and select/confirm your choice by pressing OK.
  4. After completing your selection, exit by pressing RESET twice.

The following table lists the analog trip computer's functions:

FunctionDescription
Digital speed

– km/h

– mph

– None

This displays the vehicle's speed digitally in the center of the instrument panel

  • Open by pressing OK, scroll using the thumb wheel, confirm by pressing OK and exit by pressing ENTER.
Trip comp. opt.

– Distance to empty

– Fuel consumption

– Average speed

– Trip odometer T1 and total dist.

– Trip odometer T2 and total dist.

Selections among the trip computer information headings are made here. The symbols that have already been selected have a check mark and are displayed in white. Those not selected are not checked and are displayed in gray:

  1. Open the function by pressing OK and scroll to the desired heading using the thumb wheel.
  2. Confirm by pressing OK. The symbol will change colors from gray to white and will be checked.
  3. Continue this procedure or exit by pressing RESET.
Service status
Shows the number of months and mileage until the next scheduled service.
Messages (##)
For additional information, see Information display – menu controls.

Information headings

Any of the information headings in the following table can be displayed. To do so:

  1. Ensure that none of the trip computer controls are being used in a command sequence; reset them by pressing RESET twice.
  2. Turn the thumb wheel to begin displaying the information headings. Stop on the desired heading.
  3. See the table for an explanation of the heading or the actions that can be taken.
Information headings in the instrument panelDescription
Trip odometer T1 and total dist.
  • Press and hold RESET to reset trip odometer T1.
Trip odometer T2 and total dist.
  • Press and hold RESET to reset trip odometer T2.
Distance to emptySee Distance to empty in Trip computer – Supplementary information.
Fuel consumptionCurrent fuel consumption.
Average speedPress and hold RESET to reset Average speed.
-No information will be displayed. This also indicates the beginning/end of the list of information headings.

Scroll among the trip computer information headings at any time by turning the thumb wheel until the desired heading is displayed.

Did this help?