Customized supportGet relevant information to your specific car.

Bulbs – cover

The larger cover has to be removed in order to change the high/low beam headlight bulbs.

Removing the cover to access the bulbs

P3-1320-S60/V60/V60H Headlamp cover removal

Note

Before starting to replace a bulb, see Bulbs – introduction.
  1. Loosen the cover's four retaining screws (3-4 turns) with a Torx T20 tool (1). The screws should not be removed completely.
  2. Push the cover to the side.
  3. Remove the cover.

Reinstall the cover in the reverse order.

Did this help?