Navigation* – map and system information

Volvo offers maps covering North America as well as other parts of the world.

During updates, new information is added and older, possibly outdated information is removed.

System information

P3-1346-NAV-Melco Meny Inställn System-info-2
In the navigation system's normal view, press the thumb wheel/OK/MENU and select Settings → System information.
A summary of the current navigation system status, such as the current traffic information transmitter, operative map data and map version will be displayed.

Map content

 Note

Map data may not provide complete coverage of all remote areas.

The areas covered are constantly being expanded, which means that map updates are necessary occasionally. Contact your Volvo retailer.

See support.volvocars.com for map and other Sensus Navigation-related information.

Map areas

The map information in your vehicle is determined by your country/market. Contact a Volvo retailer if map information for another area is required.

Map updates

Map updates are downloaded from the Internet1 to a USB flash drive2. The information is then transferred to the vehicle's navigation system using the USB socket in the tunnel console.

 Note

  • Instructions for downloading information and updating the navigation system are available on the Internet.
  • For questions regarding updates, contact a Volvo retailer or go to support.volvocars.com.

Updating

Follow the on-screen instructions for updating the navigation system. They will show the various stages in the update procedure and the time remaining.

 Note

Some of the navigation system's functions will be disabled or reduced while updating is in progress.
With the vehicle parked outdoors, start the engine.
Connect the USB flash drive to the vehicle's USB socket and follow the instructions shown on the center console screen.
When Map update finished is displayed, the procedure is completed and all of the navigation system's functions can be used normally.

Updating the system may add new functionality that is not described in this manual.

Resuming an interrupted update

If the update was not completed when the engine was switched off, the procedure can be resumed where it left off the next time the engine is started if the USB flash drive is still connected. If the flash drive has been removed, start the engine and reconnect the USB flash drive.

When Map update finished is displayed, the procedure is completed.

Related documents