BLIS* – operation
The Blind Spot Information System (BLIS) is an information system that indicates the presence of another vehicle moving in the same direction as your vehicle in the side-view mirror's "blind area."
Switching BLIS on and off
BLIS is automatically activated when the ignition is switched on. The indicator lights will provide confirmation by flashing 3 times.
- The system can be switched off by pressing the BLIS button in the center console (see the illustration). The indicator light in the button goes out when the system is switched off, and a text message is displayed.
- BLIS can be switched on again by pressing the button. The indicator light in the button will illuminate and a new text message will be displayed. Press the OK button (see Information display – menu controls) to erase the message.
Depending on the vehicle's optional equipment, there may not be space for the BLISbutton in the center console. In this case, BLIS can be switched on and off in the menu system by pressing MY CAR and going to . See My Car – introduction for a description of the menu system.