Tire sealing system – checking inflation pressure
The tire sealing system can also be used to check the tires' inflation pressure.
Stage 2: Checking inflation pressure
- Connect the tire sealing system as described in stage 1, see Tire sealing system* – sealing hole.
- Refer to the inflation pressure table in this chapter for the correct inflation pressure. If the tire needs to be inflated, start the tire sealing system’s compressor. If necessary, release air from the tire by turning the air release knob counterclockwise.
The compressor should not be used for more than 10 minutes at a time to avoid overheating.Important
If you interrupt your trip for more than 1 hour, check the inflation pressure in the damaged tire again before continuing.Warning