Rear seats – head restraints
The rear seat head restraints can be folded down. The center head restraint can be raised/lowered according to the passenger's height.
Rear center head restraint
The center head restraint should be adjusted according to the passenger's height. The restraint should be carefully adjusted to support the occupant's head.
- Pull the head restraint up as required.
- To lower, press and hold the button (located at the center, between the backrest and the head restraint) while pressing the head restrain down carefully.
Warning
The center rear seat head restraint should only be in its lowest position when this seat is NOT occupied. When the center seat is occupied, the head restraint must be correctly adjusted to the passenger’s height so that, if possible, the entire back of the head is covered.
Manually folding down the rear seat's outboard head restraints
- Pull the handle closest to the head restraint to fold it down.
- To return the head restraint to the upright position, push it up until it clicks into place.
Note
- The head restraint must be returned to the upright position manually.
- The outboard head restraints cannot be folded down on models that are not equipped with this button.
Important
The rear head restraints should not be kept folded down for prolonged periods. This could result in pressure marks in leather upholstery.
Warning
For safety reasons, no one should be allowed to sit in the outboard rear seat positions if the head restraints are folded down. If these positions are occupied, the head restraints should be in the upright (fixed) position.
Automatically folding down the rear seat’s outboard head restraints
The ignition must be in mode II.
Press the button to lower the rear head restraints for improved visibility.
Note
- The head restraint must be returned to the upright position manually.
- The outboard head restraints cannot be folded down on models that are not equipped with this button.
Important
The rear head restraints should not be kept folded down for prolonged periods. This could result in pressure marks in leather upholstery.
Warning
For safety reasons, no one should be allowed to sit in the outboard rear seat positions if the head restraints are folded down. If these positions are occupied, the head restraints should be in the upright (fixed) position.