Saving new reference values for tire inflation pressure monitoring*

For example, when driving with a heavy load or at high speeds (over 160 km/h (100 mph)), tire pressure should be adjusted to the Volvo-recommended tire pressure values. The system should then be reset by saving the new inflation pressure.

To store the new inflation pressure as a reference value in the system:

Switch off the ignition.

Inflate the tire to the correct inflation pressure; see the tire pressure placard on the driver's side B pillar for recommended pressures for factory-mounted tires.

Start the vehicle.

Tap in the center display.

Tap Car status.

Tap Store pressure.

If storing cannot be performed, a message will be displayed.