You can adjust your vehicle's suspension manually using the adjustment knobs located above each wheel.
Use the adjustment knobs to adjust your vehicle's suspension settings. There is an adjustment knob for each wheel's suspension.
The front wheels' suspension adjustment knobs are located under the hood.
The rear wheels' suspension knobs are located above the corresponding rear wheel in the wheel housings.
Each suspension adjustment knob has a number of setting positions. The lower the number you select, the firmer the suspension.
The recommended positions are:
Performance position
Adjustment position 4
Dynamic position
Adjustment position 10
Comfort position
Adjustment position 15
Important
Volvo recommends using the same suspension setting for all four wheels.
Volvo only accepts responsibility for the recommended suspension positions.
Adjust the suspension one wheel at a time.
Note
Your vehicle must be raised using a jack to access the rear wheels' suspension adjustment knobs. Be sure to read about jack mode in a separate section of the user manual before using a jack.
Adjusting the front wheels' suspension
Turn the adjustment knob clockwise or counterclockwise to select a position.
Turn the adjustment knob clockwise until it stops to select position 0. This makes it easier to follow the position count later.
Turn the adjustment knob counterclockwise to select your desired suspension settings position. Each position makes an audible click when you turn the knob.
Adjust the suspension by the other front wheel in the same way and to the same settings position.
Adjusting the rear wheels' suspension
The rear wheels' suspension adjustment knob is covered by a rubber cap.
Remove the rubber cap covering the adjustment knob.
Turn the adjustment knob clockwise or counterclockwise to select a position.
Turn the adjustment knob clockwise until it stops to select position 0. This makes it easier to follow the position count later.
Turn the adjustment knob counterclockwise to select your desired suspension settings position. Each position makes an audible click when you turn the knob.
Reattach the rubber cap.
Adjust the suspension by the other rear wheel in the same way and to the same settings position.