Bulbs – extra high beam
The extra high beam bulb is concealed by the larger cover.
Extra high beam[1]
- Remove the headlight housing from the vehicle (see Bulbs – headlight housing).
- Remove the cover over the bulbs (see Bulbs – cover).
- Disconnect the wiring connector from the bulb holder.
- Remove the bulb holder from the headlight housing by pulling it straight out.
- Insert a new bulb in the holder. It can only be inserted in one way.
- Press the bulb holder into position in the headlight housing.
- Reconnect the wiring connector to the bulb holder.
- Put the cover back into position and reinstall the headlight housing.