Replacing the low beam headlight bulbs
The low beam bulbs in the halogen headlights can be changed without the help of a workshop.
Never touch the bulb glass with your bare fingers. Grease and oils from your fingers vaporize in the heat and will leave a deposit on the reflector, which may damage it.Important

- Remove the round low beam rubber cover from the headlight housing.
- Remove the connector from the bulb.
- Remove the bulb by pressing it slightly upward and then pulling it out.
- Insert the new bulb in the socket. The bulb's guiding pin should point straight up.
- Press the connector into place.
- Put the round rubber cover back in place.