Trip computer – Supplementary information
Average fuel consumption
Fuel consumption since the last time this function was reset.
Average speed
The vehicle's average speed since the last time this function was reset.
Current fuel consumption
Current fuel consumption is calculated approximately once a second. When the vehicle is moving at low speed, fuel consumption is displayed per unit of time. At higher speeds, it is displayed in terms of distance.
Miles or kilometers can be displayed, see the heading "Changing units".
Distance to empty
This function shows the approximate distance that can be driven on the fuel remaining in the tank. When Distance to empty shows "----", there is very little useable fuel remaining in that tank; refuel as soon as possible. The calculation is based on average fuel consumption during the last 20 miles (30 km) of driving and the amount of fuel remaining in the tank (the accuracy of this figure may vary if your driving style changes). An economical driving style will generally increase this distance.
See Economical driving for information about driving economically.
Digital speed display*
Speed is expressed in the unit not used by the instrument panel's speedometer e.g., if the normal speedometer is in mph, the trip computer will display in the speed in km/h and vice versa.
Resetting an analog instrument panel
Trip odometer(s) and average speed
Each trip computer heading must be reset individually.
Resetting a digital instrument panel
Trip odometer
Average speed and fuel consumption
Select one of the following alternatives using the thumb wheel and press OK:
- mpg
- mph
- Reset both
Changing units
To change the unit (miles/km) used to measure distance and speed, go to .