Adjusting the second row head restraints
The center head restraint in the second row of seats can be adjusted to suit the height of the seat's occupant. The outboard head restraints can be folded down* for a better rear view.
Adjusting the center head restraint
The center head restraint should be adjusted up or down according to the passenger's height. The restraint should be carefully adjusted to support the occupant's head.
To lower the head restraint, press and hold the button (see the illustration) and push the head restraint down carefully.
The center rear seat head restraint should only be in its lowest position when this seat is NOT occupied. When the center position is occupied, the head restraint should be correctly adjusted to the passenger’s height. The upper edge of the head restraint should be at least on a level with the upper-most point of the seat occupant's ear.Warning
Electrically folding down the rear seat’s outboard head restraints*
The outboard head restraints can be folded down in two ways from the center display.
From Function view
Go to the center display's Function view.- Tap the Headrest fold button.
Via settings
- The ignition has to be in at least mode II.
- In the center display, select Settings→My Car→Seats→Fold Headrest On Second Row Seats to fold down the outboard head restraints.
For safety reasons, no one should be allowed to sit in the outboard rear seat positions if the head restraints are folded down. If these positions are occupied, the head restraints should be in the upright (fixed) position.Warning
The head restraints must be returned to the upright position manually until they click into position.
The head restraint must be locked in the upright position after it has been folded up.Warning