Operating the driving lights
Familiarize yourself with operating the lights controls that are available via the left-hand steering wheel stalk.
You can move the left-hand stalk forwards or backwards to switch between different lighting selections.
The selections available are:
- High beam on
- High beam off
- High beam flash
Manual high beam
- When automatic lights mode[1] or manual passing beam is selected on the rotating ring of the left-hand steering wheel stalk, push or pull the stalk to turn the manual high beam on or off.
Automatic high beam
- When automatic high beam is activated on the rotating ring of the left-hand steering wheel stalk, pull the stalk fully to deactivate automatic high beam.[2]
High beam flash
- Pull the left-hand steering wheel stalk slightly to activate the high beam flash.