Operating the turn signals
Use turn signals to communicate how you intend to maneuver your vehicle. The controls are located on the left-hand steering wheel stalk.
The signals have two types of activation – quick and standard. While the turn signals are blinking, you will hear a clicking sound and see a turn signal symbol in the instrument panel.
Quick turn signal
- Move the left-hand steering wheel stalk slightly up or down and allow it to spring back to the middle.The turn signals blink three times before turning off.
Standard turn signal
- Move the left-hand steering wheel stalk up to turn the right turn signal on and down to turn the left turn signal on.The turn signals blink continuously until you straighten the steering wheel out after turning.
You can cancel the turn signals by moving the left-hand steering wheel stalk back to its original position.Note
Note
Turn signal malfunction
In the event of any malfunction or damage to the turn signals, the sound and the flashing turn signal symbol will be twice as fast as normal, and the malfunction symbol appears in the instrument panel.