Using stored positions for seats, mirrors and head-up display*

If the positions for the power* seat, door mirrors and head-up display* have been stored, they can be activated using the memory buttons.1

Using a stored position

P5-1507-Memory function front seat door

A stored position can be used with the front door open or closed:

Front door open

Briefly press one of the memory buttons (1-3). The power seats, door mirrors and head-up display will move and stop at the positions stored in that button.

Front door closed

Press and hold one of the memory buttons (1-3) until the seat, door mirrors and head-up display stop in the positions stored in that memory button.

If the memory button is released, the seat, door mirrors and head-up display will stop moving.

 Warning

  • This list point needs to be translated exactly to: "Because the driver's seat can be adjusted with the ignition off, children should never be left unattended in the vehicle.
  • Movement of the seat can be STOPPED at any time by pressing any button on the power seat control panel.
  • Do not adjust the seat while driving.
  • The seat should be adjusted so that the brake pedal can be depressed fully. In addition, position the seat as far rearward as comfort and control allow.
  • The seat rails on the floor must not be obstructed in any way when the seat is in motion.
  1. * Option/accessory.
  2. 1 The latest position is also saved automatically in the active user profile and will be used the next time the same profile is used again.