Detailed information for child restraint manufacturers

The table provides detailed information for manufacturers of child restraint systems regarding which locations in the car are appropriate for different kinds of child restraints.
Seat position overview for right-hand drive
1
2
5
3
4
Seat position112 (with deactivated airbag, only rear-facing child restraints)232 (with activated airbag, only front-facing child seats)23345
Seat position suitable for universal category restraints which are attached using the car's seatbelt (Yes/No)NoYes4Yes4YesYesYes
Seat position for i-Size (Yes/No)NoYes56Yes56YesNoYes
Seat position lateral fixture (L1/L2/No)NoNoNoNoNoNo
Largest suitable rearward-facing fixture (R1/R2/R3/No)NoR378NoR3NoR3
Largest suitable forward-facing fixture (F2/F2x/F3/No)NoNo

F3478

F3NoF3
Largest suitable booster fixture (B2/B3/No)NoNoB3B3NoB3
  1. 1In accordance with illustration.
  2. 2The seat cushion extension must always be retracted for the installation of child seats.
  3. 3A child seat with support legs can be used on this seat.
  4. 4Adjust the seat to a more raised position and, if necessary, seat cushion inclination. Adjust backrest inclination.
  5. 5Varies depending on market.
  6. 6For child restraint systems with support legs, adjust the seat to a more upright position.
  7. 7Works for the installation of i-Size child restraint systems and ISOFIX child restraint systems (IL) if the passenger seat is equipped with ISOFIX mountings (varies depending on market) and is i-Size-marked. The upper mounting point for child restraint systems is only available for an i-Size-marked position.
  8. 8Adjust the backrest so that the head restraint does not interfere with the child seat.

Did this help?