Fuel consumption and CO₂ emissions

The information in the tables below is in accordance with WLTP (Worldwide Harmonised Light-Duty Vehicles Test Procedure), which is an international test method for vehicles.

The fuel consumption for a vehicle is measured in litres per 100 km and carbon dioxide emissions (CO₂) are measured in gram CO₂ per km.

Explanation
Px-2046-Icon Fuel consumption BlendedWeighted combined value. The value is weighted between electric mode and fuel mode over the entire drive cycle.
Px-2046-Icon CO2Gram CO₂/km
Px-2046-Icon Fuel consumption (l/100km)Litres/100 km
Px-2046-Hybrid-Icon Range symbolCertified value for the car's potential range ("up to") in km in electric mode. The value should not be interpreted as an expected range, and the range is difficult to achieve during normal driving.
Px-2046-Icon City suburbUrban and suburban driving
Px-2046-Icon CombinedAverage value over all four drive cycle phases (urban, suburban, extra-urban and motorway driving)
Px-2046-Icon Aut transmissionAutomatic gearbox
Px-2046-Icon lowLow value
Px-2046-Icon highHigh value

 Note

If there is no consumption and emissions data in the table, this is available in an enclosed supplement.

 Note

The capacity of the hybrid battery diminishes with age and use, which may result in increased use of the internal combustion engine and, as a consequence, reduced fuel economy and reduced range during electric operation.
Px-2046-Icon Car symbolPx-2046-Icon Fuel consumption BlendedPx-2046-Hybrid-Icon Range symbol
Px-2046-Icon CO2Px-2046-Icon Fuel consumption (l/100km)Px-2046-Icon City suburbPx-2046-Icon Combined
T6 Recharge(B4204T46)Px-2046-Icon Aut transmissionPx-2046-Icon low371.7591581
Px-2046-Icon high462.0551501
T8 Recharge(B4204T34)Px-2046-Icon Aut transmissionPx-2046-Icon low371.7591581
Px-2046-Icon high462.0551501
T8 Recharge Polestar(B4204T48)Px-2046-Icon Aut transmissionPx-2046-Icon low391.7621631
Px-2046-Icon high562.5501551

The values in the table above for fuel consumption, CO₂ emissions, and range for electric mode are based on special drive cycles (see below). The car's weight may increase depending on its equipment level. Together with how heavily the car is loaded, this affects fuel consumption and CO₂ emissions, and reduces its range in electric mode. According to WLTP, each car has unique fuel consumption, CO₂ emission values and electric range values, depending on how the car is equipped. These values range between the low value and high value in the table above. In many markets, you can find your car's unique fuel consumption, CO₂ emission values and electric range values in the car's registration document.

The certified values for the car should not be interpreted as the expected values. The certification values are the comparative values obtained during special drive cycles (see below).

There are several reasons for fuel consumption that is higher and an electric range that is shorter than the values in the table. Examples of these include:

  • If the car is not regularly charged from the mains.
  • If the car is equipped with extra equipment that affects its weight.
  • Driving style.
  • If the customer chooses wheels other than those mounted as standard on the basic version of the model, this could increase rolling resistance.
  • High speed causes increased air resistance.
  • Fuel quality, road and traffic conditions, weather and the condition of the car.

A combination of the examples above could increase consumption considerably.

There may be huge deviations in fuel consumption if comparing to the drive cycle profiles (see below), which are used in the certification of the car and on which consumption figures in the table are based. For further information, please refer to the referenced regulations.

 Note

Extreme weather conditions, driving with a trailer or driving at high altitudes, in combination with poorer fuel quality than recommended, are factors that considerably increase the car's fuel consumption.

WLTP standard

From and including 1 September 2018, a new standard was introduced for calculating consumption values in the car. The WLTP standard (Worldwide Harmonised Light-Duty Vehicles Test Procedure) represents the average driving conditions for everyday driving. In comparison with the previous standard (NEDC), WLTP takes into account more varied traffic situations and speeds, but also equipment and weight classes. Optional equipment that affects consumption is deactivated during testing, e.g. air conditioning, seat heating, etc. The new standard should provide more realistic figures when it comes to fuel consumption, carbon dioxide and emissions, as well as range for electric operation. The values are intended to allow comparison between different cars and not to represent your typical normal consumption and range for electric mode.

Drive cycle profiles

A drive cycle simulates actual average driving of the car. The standard is based on four different drive cycle profiles, which are as follows:

  • Urban driving – slow driving
  • Suburban driving – average speed driving
  • Extra-urban driving – fast driving
  • Motorway driving – very fast driving.

Every drive cycle is determined by different conditions such as speed, time and mileage, for example.

The official value for combined driving, which is shown in the table, is a combination of the results from the four drive cycles, in accordance with legal requirements.

The exhaust gases are collected in order to extrapolate the carbon dioxide emissions (CO₂ emissions) during the four drive cycles. These were then analysed to determine the value for CO₂ emissions.

  1. 1 Drive mode PURE

Related documents