Start and switch off preconditioning
Preconditioning heats or cools the passenger compartment, if possible, prior to driving. The function can use direct start from the centre display or a mobile phone.
Start and switch off from car
Press Start Pre-con. & Cleaning.
Note
Preconditioning is only available when the car is connected to an electrical socket.1 A charging station that is not constantly active, due to a timer, may result in pre-conditioning failure.
If the car is not connected to an electrical socket, it is still possible to cool the passenger compartment briefly in a warm climate by starting preconditioning directly.
Note
Note
Warning
Do not use preconditioning2:
- In unventilated spaces indoors. Exhaust gases are emitted if the heater starts.
- In locations with combustible or flammable material nearby. Fuel, gas, long grass, sawdust, etc. may ignite.
- When there is a risk that the heater’s exhaust line may be blocked. For example, deep snow inside the front right-hand wheel housing can obstruct the heater’s ventilation.
Remember that the preconditioning can be started by a timer that has been set for a long time in advance.
Starting from the app
Starting the pre-conditioning, as well as information on selected settings, can be managed from a device that has the Volvo On Call* app. Preconditioning heats or cools the compartment (with the car's air conditioning) until a comfortable temperature is reached.
The passenger compartment can also be preconditioned with the car remote start function (Engine Remote Start - ERS)3 via the Volvo On Call* app.