A jack is used to raise the car, e.g. when changing the tyres.
The original jack should only be used for changing to the spare wheel. The jack's thread must always be well greased.
Tools - returning into place
The tools and jack* must be returned to their correct places after use. The jack needs to be cranked together to the correct position in order to have space.
The foam block and spare wheel are replaced in the reverse order to taking out.
Note that there is an arrow on the upper foam block. It must point forwards in the car.
The tools and jack* must be stored in the intended location in the car's cargo area when not in use.
If the floor hatch in the cargo area floor is not closed then privacy locking does not work.