Cruise control

Cruise control* temporary deactivation and standby mode

Updated 7/23/2018

The cruise control (CC – Cruise Control) helps the driver to maintain an even speed. The function can be temporarily deactivated and set in standby mode.

The steering wheel buttons and combined instrument panel in cars without speed limiterA Volvo dealer has updated information about what applies in each respective market..

The steering wheel buttons and combined instrument panel in cars without speed limiter

A Volvo dealer has updated information about what applies in each respective market.

.

The steering wheel buttons and combined instrument panel in cars with speed limiter.

The steering wheel buttons and combined instrument panel in cars with speed limiter

A Volvo dealer has updated information about what applies in each respective market.

.

Cruise control - On/Off.
Standby mode ceases and the stored speed is resumed.
Standby mode
Activate and adjust the speed.
Selected speed (GREY = Standby mode).
Cruise control active - WHITE symbol (GREY = Standby mode).

Temporary deactivation - standby mode

To temporarily disengage cruise control and set it in standby mode:

  • Press the steering wheel button .
> The combined instrument panel's marking (5) and the symbol (6) change colour from WHITE to GREY.

Automatic standby mode

Cruise control is temporarily disengaged and set in standby mode if:

  • wheels lose traction
  • the foot brake is used
  • speed falls below approx. 30 km/h
  • the clutch pedal is held depressed for a short time - however, a few seconds does not activate standby mode

    Cars with 4-cyl 2.0L engine also allow gear changing.

  • the gear selector is moved to neutral position (automatic gearbox)
  • the driver maintains a speed higher than the set speed for longer than 1 minute.

The driver must then regulate the speed.


Did this help?