V40 Cross Country

2015 Early

Symbols and messages

Driver Alert Control (DAC)* - symbols and messages

Updated 7/23/2018

Driver Alert Control - DAC can show symbols and text messages in the combined instrument panel or in the centre console's screen in different situations.

Combined instrument panel

SymbolThe symbols are schematic.

Message

Specification

Driver Alert Time for a break

The vehicle has been driven inconsistently - the driver is alerted by an acoustic warning signal + text.

Windscreen sensors blocked See manual

The camera sensor is temporarily disengaged.

Shown in the event of snow, ice or dirt on the windscreen for example.

  • Clean the windscreen surface in front of the camera sensor.

Read about the limitations of the camera sensor, see Collision warning system - camera sensor limitations.

Driver Alert system Service required

The system is disengaged.

  • Visit a workshop if the message remains - an authorised Volvo workshop is recommended.

Display

Symbol

Message

Specification

Driver Alert OFF

The function is disengaged.

Driver Alert Available

The function is activated.

Driver Alert Standby <65 km/h

The function is set in standby mode due to speed being lower than 65 km/h.

Driver Alert Unavailable

The carriageway does not have clear side markings or the camera sensor is temporarily disengaged. Read about the limitations of the camera sensor, see Collision warning system - camera sensor limitations.


Did this help?