V60 Twin Engine

2020 Early

Charging the hybrid battery

The charging cable's control unit

Updated 1/21/2020

The charging cable's control unit

The charging cable's control unit can consist of only indicators or of both indicators and controls, depending on charging cable.

Control unit with only indicators

P5-1817-Hybrid-Control module hybrid cable (EU+CH)

Control unit LEDLED (Light Emitting Diode) lamps.

LED lamp 1 shows different colours depending on charging status.
LED lamp 2 shows different colours depending on charging status.

Control unit with both indicators and controls

P5-1519-XC90 Hybrid-Control module hybrid cable

Control unit indicators and controls.

Indicator shows selected charging current.
The symbol illuminates when the charging cable is plugged into a 230 V socket (alternating current).
Pushbuttons to increase and decrease the charging current.
The symbol illuminates when the charging cable is plugged into the car's charging input socket.

Note

The charging cable will remember the last setting of the charging current. It is therefore important to adjust the setting if another 230 V socket (alternating current) is used at the next charging.

On the charging cable's control unit, set the required charging current 6–16 A. On delivery, the lowest possible charging current is preset.


Did this help?