Blind Spot Information

Activate/deactivate Blind Spot Information*

Updated 7/23/2018

The Blind Spot Information (BLIS) function can be activated/deactivated.

Location of Blind Spot Information lamp.

Location of Blind Spot Information lamp.

Indicator lamp
BLIS button in the function view on the centre display that is used to activate/deactivate the function.

Tap on the BLIS button in function view.

BLIS is activated/deactivated, a green/grey indicator is displayed in the button.

If BLIS is activated when starting the engine, the function is confirmed by the door mirror indicator lamps blinking once.

If BLIS was deactivated when the engine was switched off, it will continue to be deactivated when the engine is next started and no indicator lights will then be illuminated.

Warning

Blind Spot Information is a supplementary aid and does not work in all situations.

Blind Spot Information is no substitute for a safe driving style and the use of rearview and door mirrors.

Blind Spot Information can never replace responsibility and attention by the driver. It is always the driver’s responsibility to change lanes in a safe manner.


Did this help?