Speed limiter

Changing the tolerance for the Automatic speed limiter

Updated 7/23/2018

The Speed limiter function (Automatic Speed Limiter - ASL) can be set for different tolerance levels.

The signposted speed limit can be increased or decreased by 5 km/h (5 mph) - if, for example, the car is following a signposted speed limit of 70 km/h (40 mph) but the driver wishes to travel at 75 km/h (45 mph) instead.

Buttons and symbols for functions.

Buttons and symbols for functions.

Press the steering wheel button (1) until 70 km/h (40 mph) has been changed to 75 km/h (45 mph) in the centre of the speedometer (4).

The car then uses the selected tolerance 5 km/h (5 mph) as long as passed signs show 70 km/h (40 mph).

The tolerance is followed until a road sign with a lower or higher speed is passed - then the car follows the new signposted speed limit instead and the tolerance is deleted from the memory.

If the Road Sign Information* function is activated, the signposted speed limit will then be shown with a RED indicator on the speedometer.

The tolerance is adjusted in the same way as the speed setting is in the Speed limiter.

Did this help?