Tyres

Calibrating the tyre pressure monitoring system

Updated 7/23/2018

If necessary, change the reference values for tyre pressure monitoring, Tyre Pressure Monitoring System (TPMS).

Calibrate the TPMS system after adjusting tyre pressure in accordance with Volvo's tyre pressure recommendations, e.g. for driving with a heavy load or at a high speed.

Note

The car must be stationary when calibration is started.

Stop the engine.

Inflate the tyres to the desired pressure in accordance with the tyre pressure label on the door pillar on the driver's side.

Start the engine.

Open the Car status app in the app view.

Tap on Status to view tyre pressure monitoring.

Press Calibrate and then Done.

It is also possible to start calibration via the centre display's top view. Press SettingsMy CarIntelliSafe and select Calibrate Tyre Pressure.

Drive for at least 10 minutes at a speed of at least 30 km/h(20 mph).

The calibration starts automatically after initialisation. The system provides a confirmation when the calibration is complete.

The new reference values apply until the calibration is carried out again.


Did this help?