Important
The driver is always responsible for ensuring that the vehicle is driven while using a lighting mode that is suitable for the current driving conditions and local traffic regulations.
Primary lighting
You can choose between several different primary lighting modes in the display. Your selection sets a standard lighting behavior.
 | Auto | Automatic lights mode1 allows your vehicle to automatically detect and calculate which lighting mode is most suitable for the driving and environmental lighting conditions. |
 | Passing beam | You can manually select the passing beam to keep the front lights dipped. |
 | Parking lights | The position lights are points of illumination around the vehicle that make it more visible to other road users. You can lock the vehicle with the parking lights on if you intend to leave it for a short period of time. |
 | Off | Off deactivates all primary lighting modes.2 |
Additional lights
You can control the high beam and the turn signals with the left-hand steering wheel stalk.
The hazard warning flasher helps you to warn others of potential risks. You can turn it on or off by pressing the button in the display or the overhead console.
There are additional lights that can be enabled or adjusted in the display, such as:
| Rear fog light | The rear fog light warns traffic behind you of your presence in poor visibility conditions. |
| Adjust height of light beam | You can counteract any changes to the vehicle's balance by adjusting the height of the headlights. |
| Trailer light check | You can run tests from the display to check the lights on a connected trailer. |
