Customized supportGet relevant information to your specific car.

Parking using Park Pilot Assist

You can activate Park Pilot Assist in the parking view. It's capable of maneuvering the vehicle into a parallel parking space.

The parking view often appears automatically, such as when you are reversing, but sometimes you need to open it manually. Find the Camera app in the contextual bar or the app library .

Camera app icon

Important

Before using Park Pilot Assist

Take the time to read everything about Park Pilot Assist in this manual before using it for the first time. Understanding its capabilities and limitations is important for safe use.

Assess the situation

Make sure the traffic situation and conditions are suitable for activation. Park Pilot Assist can only assist you when parallel parking and uses nearby vehicles to help identify a suitable space. If no vehicle is parked in front of the space, the system may not detect it.

Your vehicle controls acceleration, braking and steering during assisted parking maneuvers. Even though Park Pilot Assist takes over the driving-related tasks of parking, you must still monitor the feature and its maneuvers. This means that as long as you agree with what Park Pilot Assist is doing, you don't need to do anything to speed up, slow down or steer your vehicle. However, you should always be ready to retake control of parking if you feel you need to.

Prevented activation of Park Pilot Assist

Certain events and conditions, such as a door being opened, can prevent activation of Park Pilot Assist. When the condition no longer applies, Park Pilot Assist can be activated.

Selecting an available parking space

  1. In the parking view, press the Park Pilot Assist button.

    Park Pilot Assist icon
    The vehicle begins scanning for available parking spaces.
  2. Drive slowly in gear D to continuously scan for available spaces. Use the indicators to choose which side you want to park on.
    When the vehicle identifies an available parking space, it will be highlighted in the center display. You need to pass a spot before it appears as available in the center display.
  3. Stop the vehicle and select the suggested parking space via the center display to park there.

Starting the parking maneuver

  1. Start the parking maneuver by lightly tapping the brake pedal once.

    Note

    Your vehicle won't begin any automatic maneuvers until you have selected a parking space via the center display.
  2. Let go of the steering wheel and follow any further instructions in the center display.

    Warning

    Pay attention to your surroundings and take control of the vehicle if necessary.

    Note

    During Park Pilot Assist parking maneuvers

    You might experience Park Pilot Assist parking maneuvers differently, depending on the situation. Sometimes, it might seem like the feature is a bit hesitant or that the vehicle is going backward and forward a lot. This is just part of the parking process but it can be due to difficulties with detection, positioning or planning. In other cases, you might feel that the parking is very fast or straightforward. If your selected parking space becomes unavailable or the parking maneuver can't be completed, your vehicle will notify you. If you don't see a notification, you can let the vehicle continue parking as long it's safe to do so.

  3. The vehicle confirms when it has completed the maneuver and puts the vehicle in park.

Did this help?