Keyless drive* – unlocking with key blade
If the remote key does not function normally (weak battery, etc.), the vehicle can be unlocked with the detachable key blade.
Remove the key blade from the remote key (see Detachable key blade – detaching/reinserting for instructions).
Press the key blade approx. 0.5 in. (1 cm) straight up in the hole on the underside of the keyhole cover.
The cover will come off due to the pressure exerted when the key blade is pushed upward.
Insert the key blade as far as possible in the driver's door lock. Turn the key blade to unlock the driver's door. This will trigger the alarm.
To turn off the alarm, insert the remote key in the ignition slot. This also applies to vehicles equipped with the optional keyless drive.
Press the cover back into place after the door has been unlocked.