Residual current device in charging cable

The charging cable1 has a circuit breaker that helps protect against current overloads and thermal overheating.

 Warning

Only charge the vehicle using approved, grounded wall outlets. If the electrical circuit or electrical socket's capacity is not known, let a licensed electrician inspect the electrical circuit's capacity. Using a charge level that exceeds the electrical circuit's or electrical outlet's capacity may start a fire or damage the electrical circuit.

 Warning

  • The charging cable's residual current breaker helps protect the vehicle's charging system but cannot ensure that an current overload will never occur.
P5P6-2017- Electric drive- Control module cable
Control module's LED2 indicator.
  1. P5-Icon red circle 1LED indicator

If the control module's built-in residual current device is triggered, the LED indicator will light up red. Check the wall outlet. Have the outlet checked by a licensed electrician or try using another wall outlet.

P6-2017- XC40H Control unit current

 Important

  • Check the capacity of the socket.
  • Other electronic equipment connected on the same fuse circuit must be disconnected if the total load is exceeded.
  • Do not plug in the charging cable if the outlet is damaged, worn or defective.
  1. 1 For charging with a mode 2 charging cable.
  2. 2 LED (Light Emitting Diode)