Detailed information for child seat manufacturers

The table provides detailed information for child seat manufacturers on what locations in the vehicle are suitable for what types of child seats.
P5-1817-S60/V60–Safety–Child restraint placement overview
Seat positions in left-hand drive cars.
P5-1817-S60/V60–Safety–Child restraint placement overview RHD
Seat positions in right-hand drive cars.
Seat position112 (with deactivated airbag, only rear-facing child seats)2, 32 (with activated airbag, only forward-facing child seats)2, 33445
Seat position suitable for universal category restraints that are attached using the vehicle's seatbelt (Yes/No).NoYes5Yes5YesNoYes
Seat position for i-Size (Yes/No)NoNoNoYesNoYes
Seat position lateral fixture (L1/L2/No)NoNoNoNoNoNo
Largest suitable rearward-facing fixture (R1/R2/R3/No)NoR36NoR3NoR3
Largest suitable forward-facing fixture (F1/F2/F2x/F3/No)NoNoF3F3NoF3
Largest suitable booster fixture (B2/B3/No)NoNoB3B3NoB3
  1. 1In accordance with illustration.
  2. 2The seat cushion extension must always be retracted for the installation of child seats.
  3. 3Child seats with support legs can be used here.
  4. 4Child seats with support legs cannot be used here.
  5. 5Adjust the seat backrest to a more upright position.
  6. 6Works for the installation of ISOFIX child seats that are semi-universally approved (IL) if the vehicle is equipped with the ISOFIX console accessory (the accessory range varies depending on market). There are no upper tether anchors for child seats here.

Did this help?