Rear seats – head restraints
The rear seat head restraints can be folded down. The center head restraint can be raised/lowered according to the passenger's height.
Rear center head restraint
The center head restraint should be adjusted according to the passenger's height. The restraint should be carefully adjusted to support the occupant's head.
- Pull the head restraint up as required.
- To lower, press the button at the base of the head restraint’s left support while pressing the head restrain down carefully.
Warning
The center rear seat head restraint should only be in its lowest position when this seat is NOT occupied. When the center position is occupied, the head restraint should be correctly adjusted to the passenger’s height. The upper edge of the head restraint should be at least on a level with the upper-most point of the seat occupant's ear.
Automatically folding down the rear seat’s outboard head restraints
The ignition must be in mode II.
Press the button to lower the rear head restraints for improved visibility.
Note
- The head restraint must be returned to the upright position manually.
- The outboard head restraints cannot be folded down on models that are not equipped with this button.
Important
The rear head restraints should not be kept folded down for prolonged periods. This could result in pressure marks in leather upholstery.
Warning
For safety reasons, no one should be allowed to sit in the outboard rear seat positions if the head restraints are folded down. If these positions are occupied, the head restraints should be in the upright (fixed) position.