Rear Park Assist Camera (PAC) – operation

The Park Assist Camera is designed to provide the driver with a view of the area behind the vehicle when backing up.

Activation

P31346- Park Assist Camera

PAC is activated when the gear selector is moved to R if the system is selected in the MY CAR menu system or by pressing the CAM button in the center console. See My Car – introduction for a description of the menu system.

If PAC is not activated when the gear selector is moved to R, press the CAM button on the center console.

PAC will automatically override the view currently on the screen and will display the camera's view behind the vehicle.

Deactivation

Move the gear selector from R to another gear. The camera remains active for approx. 5 seconds after the gear selector has been moved from R or until the vehicle's forward speed exceeds 6 mph/10 km/h (21 mph/35 km/h in reverse). The screen will then revert to the view that was displayed before R was selected.

 Note

If any button on the center console control panel is pressed, the camera image will disappear from the display. Pressing CAM will return the camera image to the display.

Settings

By default, PAC is set to activate when the gear selector is moved to R

To change PAC settings when a camera view is displayed:

  1. Press OK/MENU when a camera view is on the screen. A menu will be displayed.
  2. Turn TUNE to scroll to the desired setting.
  3. Press OK/MENU to make the setting and exit the menu by pressing EXIT.

Summary

  • Pressing CAM will activate the camera even if the gear selector is not in Reverse.
  • If there are two cameras installed on the vehicle*, turn TUNE or press CAM to toggle between the cameras.
  1. * Option/accessory.

Related documents