Customized supportGet relevant information to your specific car.

Updating your vehicle's software

Update your vehicle's software to receive new features and improvements without having to visit a workshop.

The software update can be downloaded over the air (OTA), when you are connected to the internet. You can choose to start the installation immediately or at a later time.

This article is applicable to models with Google built-in.

 Note

Software updates are free as long as you update your vehicle on a regular basis. If you don't, you may need to visit a workshop to be able to get the updates over the air again. A workshop-assisted software update may incur a fee.

Certain software releases can only be installed by workshops. If this applies to your vehicle, you'll be notified.

Updating your vehicle's software includes two steps:

 Note

There may be text differences in the center display depending on the vehicle model.

Downloading software updates

Each vehicle has a unique configuration and not all vehicles are updated at the same time with the same software. You only receive a download notification if it is applicable to your vehicle.

An internet connection provided by the vehicle's built-in SIM card is required when downloading software updates. Downloading via personal SIM or Wi-Fi is currently not supported.

EX30: You have to enable automatic software downloads in the Volvo Cars app. Without consent, your vehicle cannot download updates:

Go to the vehicle tab and press Car software.
Enable Over-the-air updates.

EX90: You can enable automatic software downloads in the center display:

Press the vehicle symbol in the bottom bar.
Go to SettingsPrivacyVolvo privacy settings.
Enable Automatic software download.

All vehicles with Google built-in except EX30 and EX90: You can enable automatic software downloads in the center display.

Go to the settings symbol and press SystemSoftware update.
Enable Automatic software download.

Installing a new software version

When the software has downloaded, you'll receive a notification in the vehicle's center display and via the Volvo Cars mobile app, along with instructions on how to proceed with installing the new software. An internet connection is not required for this.

You can install the software in two ways:

Prerequisites for installing software:
  • For fully electric vehicles, the high-voltage battery level must be at least 40%.
  • For plug-in hybrids, software installation is not available during charging. However, if the vehicle is fully charged, with the charging cable still attached to the vehicle, software installation can proceed.
  • The vehicle needs to be locked.

It is not possible to access or drive your vehicle during the installation. It's a good idea to install the update overnight because it can take up to 90 minutes to complete.

 Important

  • Accessing the vehicle during the installation process risks interrupting or terminating the installation. This may cause problems with the vehicle's functions.
  • If you urgently need to access your vehicle, you will need to use the key blade. This is because the key fob's ranged function is disabled during the installation. Read more about opening the vehicle with a key blade in the user manual.

Installing software via the Volvo Cars app on your phone:

You can choose to start the installation immediately or schedule it for a later time via the push notification on your phone. You can also open the app, press the vehicle tab and go to Car softwareSoftware update.

Over-the-air software update via app

Installing software via the vehicle's center display:

You can choose to start the installation immediately or schedule it for a later time. If you choose to postpone the installation, you can easily find the notification again by swiping down from the top of the display to access your notifications.

Press Install now or Schedule install in the center display.
Exit the vehicle and lock the doors.
Over-the-air software update via vehicle

A notification is shown in the center display and the Volvo Cars app when the installation has been completed.

 Note

  • If the installation wasn't successful, contact a Volvo retailer.
  • If you experience any issues with the software installation or with the vehicle in any other way, contact Volvo Cars customer service (via phone or the Volvo Cars app) or your Volvo workshop.

Finding your vehicle's current software version

You can see the currently installed software version in the center display.

EX30 and EX90: Press the vehicle symbol in the bottom bar and go to SettingsSystemSoftware update.

All vehicles with Google built-in except EX30 and EX90: Go to the settings symbol and select SystemSoftware update.

Problems updating software

If you are experiencing problems updating your vehicle's software, you can try to restart the center display. For more information, read Restarting the center display.

Applicable models

C40, model year 2022-2024

EC40, model year 2025 and later

EX30, model year 2024 and later

EX40, model year 2025 and later

EX90, model year 2025 and later

S60, S60 Recharge, model year 2023 and later

S90, S90 Recharge, model year 2022 and later

V60, V60 Recharge, V60 Cross Country, model year 2023 and later

V90, V90 Recharge, V90 Cross Country, model year 2022 and later

XC40 Recharge Pure Electric, model years 2021–2024

XC40 (mild hybrid), model year 2023 and later

XC60, XC60 Recharge, model year 2022 and later

XC90, XC90 Recharge, model year 2023 and later


Did this help?