Cargo area cover

The cargo area cover can be used to conceal objects in the cargo area.
P3-1020-v60 Insynsskydd lastrum

Use

  • Pull the cover over the cargo and hook it into the holes in the rear cargo area pillars.
  • To retract (roll up) the cover, release it from the holes and guide it toward the rear seat backrest.

Installing the cover

Press the end piece on one side of the cargo area cover into the retaining bracket in the side panel of the cargo area Ikon röd pil 1.
Do the same on the opposite side Ikon röd pil 2.
Press both sides of the cover until they click into place Ikon röd pil 3. The red mark will no longer be visible.
Check that both ends of the cover are securely locked in place.

Removing the cover

Press one of the end pieces of the cover inward.
Pull the cover carefully upward and outward. The other end will release automatically from its retaining bracket.

Folding down the cargo area cover's rear flap

The cargo area cover's rear flap points horizontally when the cover is retracted (rolled up). To fold it down:

Pull the flap slightly rearward past its supports and fold it down.

 Note

On models equipped with this cover, it should be removed before a child seat is attached to the child restraint anchors.

Related documents