Polishing and waxing

Normally, polishing is not required during the first year after delivery, however, waxing may be beneficial.
  • Before applying polish or wax the vehicle must be washed and dried. Tar spots can be removed with kerosene or tar remover. Difficult spots may require a fine rubbing compound.
  • After polishing use liquid or paste wax.
  • Several commercially available products contain both polish and wax.
  • Waxing alone does not substitute for polishing a dull surface.
  • A wide range of polymer-based waxes can be purchased today. These waxes are easy to use and produce a long-lasting, high-gloss finish that protects the bodywork against oxidation, road dirt and fading.
  • Do not polish or wax your vehicle in direct sunlight (the surface of the vehicle should not be warmer than 113 °F (45  °C).

 Important

Volvo does not recommend the use of long-life or durable paint protection coatings, some of which may claim to prevent pitting, fading, oxidation, etc. These coatings have not been tested by Volvo for compatibility with your vehicle's clear coat. Some of them may cause the clear coat to soften, crack, or cloud. Damage caused by application of paint protection coatings may not be covered under your vehicle's paint warranty.

Do not use metal polishing agents on anodized aluminum surfaces. Doing so could result in discoloring and damage the surface finish.

Related documents