Windshield wipers in the service position

The windshield wiper blades must be in the service (vertical) position for certain operations, e.g. replacing the blades.
P5-1617-S90 V90-Service position wiper blades
Windshield wipers in the service position.

The windshield wipers must be in the service position when replacing, washing or lifting the blades (e.g. to scrape ice or snow from the windshield).

 Important

Before placing the wipers in service position, ensure that they have not frozen to the windshield.

Activating/deactivating service position

The service position can be activated/deactivated when the vehicle is stationary and the windshield wipers are switched off. Service position is activated/deactivated via Function view in the center display:

P5-1507-Serviceposition-button

Tap the Wiper Service Position button. The indicator light in the button will illuminate when service position is activated. The windshield wipers will move to the vertical position when service position is activated. To deactivate the service position, tap Wiper Service Position once. The indicator light in the button will go out when service position is deactivated.

The wiper blades will also move out of service position if:

  • The windshield wipers are turned on.
  • The windshield washers are turned on.
  • The rain sensor is activated.
  • The vehicle begins moving.

 Important

If the wiper arms in service position are raised from the windshield, they must be folded back against the windscreen before activating wiping, washing or rain sensor as well as before departure. This is to prevent scratching the paint on the hood.