Replacing the high beam headlight bulbs
The high beam bulbs in the halogen headlights can be changed without the help of a workshop.
Before the bulbs can be replaced, the plastic covering over the headlight must be removed.
Important
Never touch the bulb glass with your bare fingers. Grease and oils from your fingers vaporize in the heat and will leave a deposit on the reflector, which may damage it.
Remove the high beam rubber cover from the headlight housing.
Remove the bulb by turning the bulb holder upward and then pulling it straight out.
Carefully pry the plastic sleeve by the connector's locking lug to release it.
Remove the connector from the bulb.
Replace the bulb.
Position the bulb in the socket and turn it downward.
Put the rubber cover back in place.