Selecting an ignition mode
- Ignition mode 0 – Unlock the vehicle and keep the remote key in the passenger compartment.
Note
To set level I or II without engine start – do not depress the brake pedal (or clutch pedal for vehicles with manual transmission) when selecting this ignition mode.
- Ignition mode I – Turn the start knob clockwise and release it. The control will automatically return to the original position.
- Ignition mode II – Turn the start knob clockwise and hold it there for approx. 5 seconds. Release the knob, which will automatically return to its original position.
- Back to ignition mode 0 – To return to ignition mode 0 from modes I and II, turn the start knob clockwise and release it. The control will automatically return to the original position.