Connect key to user profile

A key can be connected to a profile. This profile and all of its settings will then be automatically selected every time the vehicle is used with that particular key.

The first time the key is used, it is not connected to any specific profile. The Owner profile or the last-used profile is automatically activated when the vehicle is started.

Connecting a key to a profile

 Note

If the key was previously linked to another profile, the link will be moved from the previous profile to the active profile.
Tap iCup-2037-Settings symbol.
Select Profiles.
Select Connect key to profile to connect the selected key to a profile.

A profile can only be connected to the key currently being used in the vehicle. If there are any other keys in the vehicle, the message More than one key found. Place the key you want to connect on the backup reader. will be displayed

P6-1746-XC40- Backup start place in tunnel console
Location of the backup reader in the tunnel console.

Disconnecting a key from a profile

Tap iCup-2037-Settings symbol.
Select Profiles.
Select Disconnect key from profile to delete the active profile from the connected key.

A key can be deleted from a profile even if the key is not inside the vehicle.