Automatic braking at a standstill (Hold)

With the automatic braking at a standstill function (Hold), the driver can release the brake pedal and the brakes will remain applied, for example, when the vehicle has stopped at a traffic light.

Activating braking at a standstill (Hold)

The function is activated automatically at a standstill if gear position D or R is selected and
  • One Pedal Drive is activated
  • the vehicle is at risk of starting to roll.
or
  • One Pedal Drive is deactivated
  • the vehicle is already stationary and the brake pedal is fully depressed and then released.

Deactivating braking at a standstill (Hold)

The function is released when the driver presses the accelerator pedal with a gear position selected.

 Note

Auto-hold brakes are also deactivated when the driver moves the gear selector to Neutral position.
The parking brake is applied automatically
  • if the vehicle is switched off
  • when the driver removes their seat belt and/or opens the driver's door.
  • if the function is active and the vehicle has been stationary for a long period of time (about 5-10 minutes).

Automatic braking at a standstill (Hold) can also switch over to the parking brake in other situations.

Symbols in the instrument panel

SymbolMeaning
P5P6-2037-iCup-Hold function symbol
The symbol is illuminated when Automatic braking at a standstill (Hold) is activated and is keeping the vehicle stationary. Note that Automatic braking at a standstill (Hold) can be activated without the symbol being lit.
P5P6-2037-iCup-Parking brake warning symbol

1

P5P6-2037-iCup-Parking brake warning symbol - USA/Canada

2

This symbol illuminates when the function is using the parking brake to keep the vehicle stationary.
  1. 1 Canadian models.
  2. 2 US models.